Temperature Humidity Test chamber are widely used in testing various types of materials for their tolerances of heat, cold, dry and humidity. It is applicable for quality inspection for all types of electronic products, electric appliance, and products from communication ,instruction , automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries. Unique shape with high performance material, whether you’re testing aerospace products, electronic instrumentation, materials, electrical and electronic products and various electronic components, our High low alternating temp. humidity test chamber can give you a perfect solution. It ables to simulate a wide range of temperature and humidity environments, that temperatures ranging from -70°C to +150°C,and humidity range is from 10% to 98% RH. KOMEG can also offer you best solutions based on your own requirements.
PROGRAMMABLE TEMPERATURE AND HUMIDITY TEST CHAMBERS
Description
Standard Configuration
- Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m
- No fuse breaker, over pressure、over heat and over current protection for compressor, Over temperature protection, overload protection of the blower, dry heat protection
Optional Accessories
- Cable Port: Φ100mm cable port is available
- Shelves
- Ro-type water purifier：R-80/day
- Provide to keep the humidifying heater and wet bulb wick free from scale.
- Inner glass door with operation port
- A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
- Dehumidifier
- The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5℃ 5%RH) for electrostatic reliability tests.
- Temperature and humidity recorder
- 100 to +150℃/0 to 100%RH 100mm with effective width 100mm and 2 pen Temperature 1 pen and humidity 1 pen.
- 100 to +150℃/0 to 100%RH 100mm with effective width 100mm and 6 dots Temperature 3 dots and humidity 1 dot.
- 100 to +150℃/0 to 100%RH 100mm with effective width 180mm and 12 dots Temperature 6 dots and humidity 6 dots.
- Defrosting circuit
- The chamber automatically detects and melts the frost on the evaporator when operating below 0℃.
- Liquid or infection
- In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected to the chamber.
Specifications
(at +20ºC room temp. Or +25ºC water temp with empty load)
Note:
- We reserve the right to change specifications without prior notice
- Customized sizes and configurations available
Product Certification and Features
- CE approved with 1 year warranty.
- 33% energy saving than 2rd generation of KOMEG products.
- Working hours up to 4,320 hours testing without downtime.
- The ideal simulation test chamber for all heat and cold testing between -20 ºC and 150 ºC.
- Well-suited for reliability testing based on current test standards in the temperature range of -20 °C to 150 °C and 20% to 98% RH.
- Meet all requirements for extreme testing and low temperature alternating.
Applications
Applicable to environmental adaptability and reliability testing in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc..
Mass Production
Now our month production capacity is 100 pcs, we send goods without delay.
We will do at least 7*24 hours test before shipment to ensure good quality.
Packing
We have standard inner box and carton for the packing. Especially for the samples,
we will pack them in much safe to guarantee that you can receive a please.
Shipping
Usually its LCL shipped by sea, and we support TNT,FedEx,UPS,DHL.for BL and documents sending.
Installation
- Strictly refer to the instruction manual during installation, stop if improper installation happens.
- Any questions, please feel free to contact us.
Reviews
There are no reviews yet.